Subaru Conversions

SCP

10'-12' Subaru EJ25 Accessory Belt

If your accesory belt is worn and/or cracked it's time to replace it. Get one now!   Fitment: 2010-2012 EJ25 Subaru Engines With alternator and AC compressor With alternator and power steering pump With alternator, power steering pump, AC...

Intake Manifold Gasket: Subaru 2.2L

These intake gaskets should be replaced whenever the intake manifold is removed and reinstalled.Fits the following Subaru engines:1990-1998 2.2LSold individually. Two are required per engine.

Intake Manifold Gasket: Subaru 2.5L DOHC

These intake gaskets should be replaced whenever the intake manifold is removed and reinstalled.Fits the following Subaru engines:2.5L DOHC non-turboSold individually. Two are required per engine.

Timing Belt Guide Subaru M/T

This timing belt guide usually comes on engine installed in Subaru with manual transmission to keep the belt in place during engine braking between shifts or rolled backward in gear. We recommend installing this over the crank pulley if your engine is...

Subaru to Vanagon Automatic Transmission Adapter and Flex Plate

Subaru to Vanagon Automatic Transmission Adapter and Flex Plate Made to exacting standards, this adapter and flex plate come with all the parts needed to bolt the 2.0L, 2.2L, 2.5L, 3.0L, or the 3.3L Subaru engine to any Vanagon automatic transmission...

Subaru Flywheel Bolt

Subaru flywheel bolt. 8 required per flywheel. Subaru Flywheel

SCP

Accelerator Cable Kit: Manual Transmission: 6mm

This kit is a complete replacement of the stock manual transmission accelerator cable and includes all parts to connect the Subaru engine to the accelerator pedal. Fitment Notes: 1990-1994 Subaru engines and the SVX have a 6mm barrel at the throttle...

Automatic Accelerator Cable Kit: 6mm (Drive by cable Subaru)

This kit allows the original Subaru throttle cable to be used to connect the Subaru engine to the Vanagon's Automatic transmission. The Vanagon original accelerator pedal to transmission cable will be reused. Kit includes: Bracket that bolts to the side...

Rubber Engine Mount - Outer

  We tested several brands of rubber mounts and discovered that there is a difference between the cheapest and the best. Ours are noticeably quieter than less expensive mounts and we believe they are easily worth the price difference. We think...

Coolant Hose Kit

This hose kit is for all 4 cylinder Subaru Vanagons with a reversed coolant manifold. 4 cylinder cars that do not have a reversed manifold and 3.3L powered Vanagons should use our Turbo and 3.3L Coolant Hose Kit. The kit works best with our coolant...

SCP

Vanagon Coolant Hose Kit: Turbo & 3.3L

This kit utilizes our experience from completing over 300 Subaru conversions and provides a cooling system that is easily bled, a heater system that works perfectly, and a cool running engine – exactly what your Vanagon wants and needs!   Key...

SCP

Coolant Reservoir Bracket

We designed this to bolt directly to the stock air cleaner mount on the right side firewall that formerly held the air cleaner assembly. This keeps the reservoir high enough without hitting the engine cover.

SCP

Bellhousing for Subaru: Manual Transmission Vanagon

Small Car's Bellhousing is the ideal interface between the Subaru engine and the Vanagon manual transmission. Made from an aluminum alloy casting, it is precision machined and designed to use an integrated slave cylinder & release bearing. This...

SCP

Vanagon Warning Light Panel

This panel set is for the Vanagon gauge cluster to allow the original OXS warning lamp to be used as a check engine light. It is necessary for California conversions but it is helpful for all conversions to indicate engine malfunctions and for reading...

SCP

Stage 1 Clutch Kit for SmallCar Bellhousing

Need to do an entire clutch job and are tired of buying all your performance clutch parts separately? Just need everything in one product? Our Clutch Kit for Small Car's Bellhousing is for you. Fitment: Subaru engines up to 150HP (2.2L and...

SCP

Stage 2 Clutch Kit for Small Car Bellhousing

Need to do an entire clutch job and are tired of buying all your performance clutch parts separately? Just need everything in one product? Our Stage 2 Performance Clutch Kit for Small Car's Bellhousing is for you.   Fitment: Subaru engines up...

SCP

Subaru-Vanagon Turbo Parts Kit: Manual Transmission Vanagons

Conversion Parts Kit for Subaru 2.0L, 2.2L & 2.5L Turbo into a Manual Transmission Vanagon A complete kit of parts to convert your Vanagon to a smooth, powerful, and more reliable Subaru turbo powerplant. This kit is a matched and proven set of parts...

SCP

Subaru-Vanagon 4 Cyl 2WD Engine Mount Powder Coated

New! Improved design for late Subaru engines - provides more clearance for thermostat housing and water pump. Our mount has the advantage of placing the stock Vanagon rubber mounts at the rear of the engine which drastically reduces engine movement and...

ScanGauge

ScanGauge Cable

Use this cable to allow your ScanGauge II or ScanGauge III tool to work in an extra vehicle without removing your original cable.Most applications like Vanagons and Buses will require a cable extender. Get that here. 

Performance Clutch Kit: SVX 5 Speed

This performance clutch kit is the best we've found for the SVX 5 speed conversion. We tried clutches from ACT, Clutchmasters, and a few others and found the pedal pressure to be excessive as well as other problems.You will like the feel and the...

SCP

Subaru 4 Cyl-Vanagon 4WD Engine Mount Powder Coated

New! Improved design for late Subaru engines - provides more clearance for thermostat housing and water pump. Our mount has the advantage of placing the stock Vanagon rubber mounts at the rear of the engine which drastically reduces engine movement and...

2.5L Subaru-Vanagon Turbo Parts Kit - Automatic Vanagons

Conversion Parts Kit for Subaru 2.0L, 2.2L & 2.5L Turbo into an Automatic Transmission Vanagon A complete kit of parts to convert your Vanagon to a smooth, powerful, and more reliable Subaru turbo powerplant. This kit is a matched and proven set of...

Crank Seal Subaru Flywheel End: Viton

This crank seal is Viton and will outlast the original 3-4 times.These are the only type of seal we'll use, and they're not easily replaced. Fitment Notes:1990-2008 normally aspirated Subaru engines: 1.8, 2.0, 2.2, 2.5, 3.0, and 3.3L Sold indivually. One...

SCP

Stainless Steel Exhaust "J" Pipe

Finally! A stainless steel version of the stock Vanagon collector to catalytic converter pipe. This has loose flanges on both ends and when used with the OE metal o-ring (linked below), it allows more flexibility in muffler and catalytic...