Subaru Conversion Kits & Parts

SCP

Drive-by-Wire Pedal Kit: All Vanagons and DBW Subaru Engines

Use this kit to mount the Subaru drive by wire pedal behind the passenger side tail light. This kit will fit any Vanagon. If the Vanagon has an automatic transmission you will need a kickdown cable kit as well. Be sure to add that on the drop down...

SCP

Subaru to Vanagon Wiring Harness Modification Service

Harness Modification Includes: The modification of customer supplied ENGINE HARNESS. A basic functionality test: checking for correct engine management functions (including variable valve timing), main and fuel pump relay operation, the elimination of...

Adjustable Fuel Pressure Regulator

Subaru's variable valve timing engine does not have a fuel pressure regulator attached to the fuel rail. Consequently, a regulator is needed to achieve the proper fuel pressure the engine requires. This regulator has all the necessary fittings for...

Clutch Pilot Bearing for Smallcar Bellhousing

Replacement clutch pilot bearing for Small Car's Bellhousing.

SCP

Reversed Coolant Manifold & Heater Pipe

The SCP cast aluminum reversed coolant manifold for four cylinder Subaru engines has been developed and perfected over the last thirteen years and over 400 completed conversions. This integrated coolant bypass lets your heater work to its capabilities...

Gear Reduction Starter: Automatic

This gear reduction starter provides higher cranking torque and draws less current. This is especially helpful with any of the Subaru engines.Fits Vanagons and Buses with any engine and an automatic transmission. Specifications:Rotation CCW1.4 kW Gearing...

SCP

Vanagon Warning Light Panel: Diesel

This panel set is for the Vanagon gauge cluster to allow the original OXS warning lamp to be used as a diesel glow plug light. It is also useful to communicate engine malfunctions and for reading the blink error codes.Available in stock black color only...

SCP

10'-12' Subaru EJ25 Accessory Belt

If your accesory belt is worn and/or cracked it's time to replace it. Get one now!   Fitment: 2010-2012 EJ25 Subaru Engines With alternator and AC compressor With alternator and power steering pump With alternator, power steering pump, AC...

Intake Manifold Gasket: Subaru 2.2L

These intake gaskets should be replaced whenever the intake manifold is removed and reinstalled.Fits the following Subaru engines:1990-1998 2.2LSold individually. Two are required per engine.

Intake Manifold Gasket: Subaru 2.5L DOHC

These intake gaskets should be replaced whenever the intake manifold is removed and reinstalled.Fits the following Subaru engines:2.5L DOHC non-turboSold individually. Two are required per engine.

Specialist Components

SC ECU and Injector driver for EE20

The SC ECU and Injector driver for the Subaru EE20 turbo diesel is a standalone engine management system for this fantastic engine. Small Car Performance has been named the exclusive distributor for this system in North America. Using Specialist...

Timing Belt Guide Subaru M/T

This timing belt guide usually comes on engine installed in Subaru with manual transmission to keep the belt in place during engine braking between shifts or rolled backward in gear. We recommend installing this over the crank pulley if your engine is...

SCP

Crossbar Spacer

Mounts between the engine crossmember and frame to lower the engine to clear the Vanagon deck lid.Includes mounting hardware. This is for 2WD Vanagons ONLY. Priced per pair.

Subaru

Header Gasket: Subaru 3.3L SVX

Gasket for Subaru 3.3L SVX header. Exhaust header to head gasket.Sold individually. Two are required.

Subaru to Vanagon Automatic Transmission Adapter and Flex Plate

Subaru to Vanagon Automatic Transmission Adapter and Flex Plate Made to exacting standards, this adapter and flex plate come with all the parts needed to bolt the 2.0L, 2.2L, 2.5L, 3.0L, or the 3.3L Subaru engine to any Vanagon automatic transmission...

Subaru Flywheel Bolt

Subaru flywheel bolt. 8 required per flywheel. Subaru Flywheel

Subaru Flywheel

Brand new Subaru single mass flywheel works with all normally aspirated engines and clutches and works seemlessly with Small Car's Bellhousing. Comes complete with the OEM pilot bearing.Please Note: The bellhousing kit comes with a different pilot...

SCP

Accelerator Cable Kit: Manual Transmission: 6mm

This kit is a complete replacement of the stock manual transmission accelerator cable and includes all parts to connect the Subaru engine to the accelerator pedal. Fitment Notes: 1990-1994 Subaru engines and the SVX have a 6mm barrel at the throttle...

Automatic Accelerator Cable Kit: 6mm (Drive by cable Subaru)

This kit allows the original Subaru throttle cable to be used to connect the Subaru engine to the Vanagon's Automatic transmission. The Vanagon original accelerator pedal to transmission cable will be reused. Kit includes: Bracket that bolts to the side...

Rubber Engine Mount - Inner

We tested several brands of rubber mounts and discovered that there is a difference between the cheapest and the best. Ours are noticeably quieter than less expensive mounts and we believe they are easily worth the price difference. We think you'll agree...

Rubber Engine Mount - Outer

  We tested several brands of rubber mounts and discovered that there is a difference between the cheapest and the best. Ours are noticeably quieter than less expensive mounts and we believe they are easily worth the price difference. We think...

2 1/4" Exhaust Flange Gasket

Three bolt reinforced metal gasket for the 2-1/4" Exhaust Flange.

Header Gasket Subaru: 2.2: 1996-Later

Gasket for Subaru 2.2L single port header. Exhaust header to head gasket.Sold individually. Two are required.

Header Gasket Subaru: 2.2L: '90-'95 & 2.5L

Gasket for Subaru 2.2L Dual Port and 2.5L header - including turbo.Exhaust header to head gasket.Sold individually. Two are required.