Subaru Conversion Kits & Parts

Vanagon Coolant Reservoir Tank: 1986-1991

Good quality made tank with Blau German Reservoir Cap. This is a reproduction of the stock Vanagon 1986-1991 coolant reservoir tank. Required when using our coolant reservoir bracket with a 1980-1985...

SCP

Subaru EJ22 Power Steering Hose Kit

This hose connects the Subaru power steering pump to the power steering rack on the right side of the engine compartment. Works with four or six cylinder Subaru engines.

Automatic Accelerator Cable Kit: 8mm (Drive by cable Subaru)

This kit allows the original Subaru throttle cable to be used to connect the Subaru engine to the Vanagon's Automatic transmission. The Vanagon original accelerator pedal to transmission cable will...

Accelerator Cable Kit: Manual Transmission: 8mm

This kit is a complete replacement of the stock manual transmission accelerator cable and includes all parts to connect the Subaru engine to the accelerator pedal. Fitment Notes: 1990-1994 Subaru...

SCP

Tachometer Unit Calibration

The Subaru engine's ECU has a tach output. However, the late model ('86-'91) Vanagon's tachometer is not sensitive enough to pick up this signal. Lucky for you we have a solu

SCP

Vanagon Gauge Face Set (White) - 7K PRM

These white overlays are applied over your original faceplates and are available with a 7,000 or 8,000 max RPM tachometer. All attachment points are precision cut to match your original stock gauges...

SCP

Vanagon Gauge Face Set - 8K rpm white

These very nice white overlays are applied over your original faceplates and are available with 7,000 or 8,000 max rpm tachometer. Ours have the tiny square openings for the regular and trip...

Hall Effect Sensor

Replacement sensor for our Hall Effect Speed Sensor Kit. Installation Instructions

SCP

Steel Skid Plate Extension: 16"

16" metric steel addition to extend the Syncro skid plate rails for 3.3L Subaru engine conversions.

SCP

Skid Plate Extension Steel - 6"

Metric steel to extend the Syncro skid plate rails.6" is enough for one Vanagon with a 4cylinder engine.

SCP

Interface Board Deluxe

The Small Car Performance Interface Board Deluxe is designed to make a seamless 1996 and later Subaru installation with minimal engine codes, a working tach, an accurate temp gauge, and a functional...

SCP

Subaru 3.3L to Syncro Vanagon Engine Mount Adapter

The Small Car mount fits the 3.3L Subaru engines perfectly and has been designed and manufactured for 2WD Vanagons or Syncros. Our mount has the advantage of placing the stock Vanagon rubber mounts...

SCP

Subaru 3.3L to 2WD Vanagon Engine Mount Adaptor

The Small Car mount fits the 3.3L Subaru engines perfectly and has been designed and manufactured for 2WD Vanagons or Syncros. Our mount has the advantage of placing the stock Vanagon rubber mounts...

SCP

Tachometer Face (Black) 8K RPM

8,000 RPM tachometer face with precut shape and mounting holes. Also available in 7,000 RPM (shown).

SCP

Tachometer Face (Black) 7K RPM

7,000 RPM tachometer face with precut shape and mounting holes. Also available in 8,000 RPM.

SCP

Intake Hose Kit

Applications:2.5L normally aspirated: 2000 and later: 2004 and earlier: to connect the throttle body to the original air filter box2005 and la

SCP

DIY Wiring Harness Modification Kit

Are you an expereinced DIYer? Do you have persistence and dozens of hours of extra time to devote to modifying a Subaru wiring harness? Yes? Keep reading...   This kit is a vehicle specific guide -...

SCP

321 Stainless Steel Header: Subaru 2.5L (all) & 2.2L ('90-'95)

After many years in development, we’ve perfected the design and construction of our stainless-steel header. We’ve designed it to be as compact as possible for strength and to maximize ground...

SCP

Stainless Steel Header: Turbo Subaru

After many years in development, we've perfected the design and construction of our stainless-steel header. We’ve designed it to be as compact as possible for strength and to maximize ground...

SCP

321 Stainless Steel Header: 2.2L '96 and Later

After many years in development, we’ve perfected the design and construction of our stainless-steel header. We’ve designed it to be as compact as possible for strength and to maximize ground...

SCP

321 Stainless Steel Header: 3.3L SVX

After many years in development, we've perfected the design and construction of our stainless-steel header. We've designed it to be as compact as possible for strength and to maximize ground...

SCP

"The Subie-Stan" Ceramic-Coated Header

Introducing "The Subie-Stan" header from Small Car Performance.  The design has been perfected by the world famous Stan's Headers and now the option for customers who prefer a non-stainless header...

Vanagon Muffler Bracket & Clamp Set

This OE Vanagon Muffler Bracket and Clamp Set are a perfect fit for any Late Model ('86-'91) Waterboxer Vanagon running an OE Vanagon Muffler (linked below) or Small Car's Stainless Steel Muffler...

Subaru Vanagon Catalytic Converter: 2.25": Metallic Substrate

This high flow catalytic converter is the latest technology with a metallic substrate that offers higher temperature and vibration capability, increased efficiency, but decreased environmental...