T2 Bus Parts 1968-1979

SCP

T2 Bus Manufactured Wiring Harness

This is a manufactured harness is spefically designed for drive by wire EJ25s of these years 2006 Impreza 2007 Impreza 2006 Forester 2007 Forester 2008 Forester This is harness can be used with the following motors if changing the ECU, MAF, and...

SCP

Clutch Master Cylinder Spacer

Spacer used for the clutch master cylinder

Clutch Pilot Bearing Seal for Small Car Bellhousing

This is the replacement clutch pilot bearing seal for the Small Car Bellhousing

Hall Effect Speed Sensor Kit

All the OBD2 engines from 1996 on require a vehicle speed sensor. The engines up to 1995 will also idle and perform better with one installed. This hall effect speed sensor bolts to a Vanagon transmission and the magnetic ring to a cv joint flange...

Oil Filter Union

Use to delete oil cooler above the oil filter. For models with oil cooler the cooler must be removed for the conversion.

Nokian

Nokian WRG4 XL Tire

The Nokian WRG4 is a fantastic Vanagon tire. These may be the ideal tire for the majority of Vanagon owners. They have great traction, handling and braking in dry weather. They handle wet roads as well as any tire available and they are superb in snow...

Lug Nut Conical/Tapered Seat

Lug nut for both alloy and steel wheels. Specifications:14 x 1.5mm thread sizeConical seat3/4" (19mm) hex size

Lug Bolt Conical/Tapered Seat

Lug bolt for both alloy and steel wheels. Specifications:14 x 1.5 x 30mm thread sizeConical seat3/4" (19mm) hex size

Adjustable Fuel Pressure Regulator

Subaru's variable valve timing engine does not have a fuel pressure regulator attached to the fuel rail. Consequently, a regulator is needed to achieve the proper fuel pressure the engine requires. This regulator has all the necessary fittings for...

Blazecut

Blazecut 4 Meter Kit "T" Series

In the event of a catastrophic failure, only one system can ensure that the fire is automatically and rapidly suppressed: the Blazecut Fire Suppression System. The Blazecut system consists of a detection tube containing a combination of fire...

Clutch Pilot Bearing for Smallcar Bellhousing

Replacement clutch pilot bearing for Small Car's Bellhousing.

SCP

Reversed Coolant Manifold & Heater Pipe

The SCP cast aluminum reversed coolant manifold for four cylinder Subaru engines has been developed and perfected over the last thirteen years and over 400 completed conversions. This integrated coolant bypass lets your heater work to its capabilities...

Gear Reduction Starter Manual

This gear reduction starter provides higher cranking torque while drawing less current.Specifications:Rotation CCWkW 1.4Gearing 4.44 to 1 gear ratioRotatableVoltage 121.9hp motorFittment:Vanagon and Buses with a manual transmissionAny engine using a...

SCP

10'-12' Subaru EJ25 Accessory Belt

If your accesory belt is worn and/or cracked it's time to replace it. Get one now!   Fitment: 2010-2012 EJ25 Subaru Engines With alternator and AC compressor With alternator and power steering pump With alternator, power steering pump, AC...

Intake Manifold Gasket: Subaru 2.2L

These intake gaskets should be replaced whenever the intake manifold is removed and reinstalled.Fits the following Subaru engines:1990-1998 2.2LSold individually. Two are required per engine.

Intake Manifold Gasket: Subaru 2.5L DOHC

These intake gaskets should be replaced whenever the intake manifold is removed and reinstalled.Fits the following Subaru engines:2.5L DOHC non-turboSold individually. Two are required per engine.

Timing Belt Guide Subaru M/T

This timing belt guide usually comes on engine installed in Subaru with manual transmission to keep the belt in place during engine braking between shifts or rolled backward in gear. We recommend installing this over the crank pulley if your engine is...

Subaru to Vanagon Automatic Transmission Adapter and Flex Plate

Subaru to Vanagon Automatic Transmission Adapter and Flex Plate Made to exacting standards, this adapter and flex plate come with all the parts needed to bolt the 2.0L, 2.2L, 2.5L, 3.0L, or the 3.3L Subaru engine to any Vanagon automatic transmission...

Subaru Flywheel Bolt

Subaru flywheel bolt. 8 required per flywheel. Subaru Flywheel

Automatic Accelerator Cable Kit: 6mm (Drive by cable Subaru)

This kit allows the original Subaru throttle cable to be used to connect the Subaru engine to the Vanagon's Automatic transmission. The Vanagon original accelerator pedal to transmission cable will be reused. Kit includes: Bracket that bolts to the side...

Rubber Engine Mount - Outer

  We tested several brands of rubber mounts and discovered that there is a difference between the cheapest and the best. Ours are noticeably quieter than less expensive mounts and we believe they are easily worth the price difference. We think...

SCP

Coolant Reservoir Bracket

We designed this to bolt directly to the stock air cleaner mount on the right side firewall that formerly held the air cleaner assembly. This keeps the reservoir high enough without hitting the engine cover.

SCP

Bellhousing for Subaru: Manual Transmission Vanagon

Small Car's Bellhousing is the ideal interface between the Subaru engine and the Vanagon manual transmission. Made from an aluminum alloy casting, it is precision machined and designed to use an integrated slave cylinder & release bearing. This...

SCP

Vanagon Warning Light Panel

This panel set is for the Vanagon gauge cluster to allow the original OXS warning lamp to be used as a check engine light. It is necessary for California conversions but it is helpful for all conversions to indicate engine malfunctions and for reading...