Subaru Conversion Kits & Parts

ScanGauge

Cable Extension for ScanGauge

If your OBD2 connector is in the rear and more than six feet away from the dash, this extension cable adds another 20 feet to your cable. In Vanagons this allows you to keep all connections inside...

Subaru

Subaru Crank Seal: Viton

Not to be confused with other brands. Viton Crank Seals will outlast the stock Subaru ones by three to four times. Viton Crank Seals are the only seals we'll use for this area that is prone to...

Coolant pipe stainless

This heliarc welded stainless coolant pipe is designed to go across the back and the right side of the Vanagon engine bay to allow easy connection of the Subaru coolant outlet to the Vanagon radiator...

Intake Manifold Gasket: Subaru 1999-Later

These intake gaskets should be replaced whenever the intake manifold is removed and reinstalled.Fits the following Subaru engines:2.2L: 1999-2001 Legacy 2.5L Non-Turbo: 1999-2009

Subaru

Piston Ring Set 2.5L SOHC Subaru

We have been able to source Subaru rings from the OE manufacturer. We guarantee these rings to be equal to the original replacement rings and to incorporate the latest design specifications. This set...

Hose Menders: Brass

These durable hose menders are useful for various tasks in an engine conversion.Sizes available are as follows:8 x 8mm: useful for splicing fuel hoses - especially for a Syncro Vanagon5/8" x 5/8":...

Steel Header Flange

Used with Small Car's Stainless Steel Header.Specifications:3/8" thick steel(3) 2" bolt holes with long end for extra support

Vanagon Coolant Reservoir Tank: 1986-1991

Good quality made tank with Blau German Reservoir Cap. This is a reproduction of the stock Vanagon 1986-1991 coolant reservoir tank. Required when using our coolant reservoir bracket with a 1980-1985...

SCP

Subaru EJ22 Power Steering Hose Kit

This hose connects the Subaru power steering pump to the power steering rack on the right side of the engine compartment. Works with four or six cylinder Subaru engines.

Automatic Accelerator Cable Kit: 8mm (Drive by cable Subaru)

This kit allows the original Subaru throttle cable to be used to connect the Subaru engine to the Vanagon's Automatic transmission. The Vanagon original accelerator pedal to transmission cable will...

Accelerator Cable Kit: Manual Transmission: 8mm

This kit is a complete replacement of the stock manual transmission accelerator cable and includes all parts to connect the Subaru engine to the accelerator pedal. Fitment Notes: 1990-1994 Subaru...

SCP

Tachometer Unit Calibration

The Subaru engine's ECU has a tach output. However, the late model ('86-'91) Vanagon's tachometer is not sensitive enough to pick up this signal. Lucky for you we have a solu

SCP

Vanagon Gauge Face Set (White) - 7K PRM

These white overlays are applied over your original faceplates and are available with a 7,000 or 8,000 max RPM tachometer. All attachment points are precision cut to match your original stock gauges...

SCP

Vanagon Gauge Face Set - 8K rpm white

These very nice white overlays are applied over your original faceplates and are available with 7,000 or 8,000 max rpm tachometer. Ours have the tiny square openings for the regular and trip...

Hall Effect Sensor

Replacement sensor for our Hall Effect Speed Sensor Kit. Installation Instructions

SCP

Steel Skid Plate Extension: 16"

16" metric steel addition to extend the Syncro skid plate rails for 3.3L Subaru engine conversions.

SCP

Skid Plate Extension Steel - 6"

Metric steel to extend the Syncro skid plate rails.6" is enough for one Vanagon with a 4cylinder engine.

SCP

Interface Board Deluxe

The Small Car Performance Interface Board Deluxe is designed to make a seamless 1996 and later Subaru installation with minimal engine codes, a working tach, an accurate temp gauge, and a functional...

SCP

Subaru 3.3L to Syncro Vanagon Engine Mount Adapter

The Small Car mount fits the 3.3L Subaru engines perfectly and has been designed and manufactured for 2WD Vanagons or Syncros. Our mount has the advantage of placing the stock Vanagon rubber mounts...

SCP

Subaru 3.3L to 2WD Vanagon Engine Mount Adaptor

The Small Car mount fits the 3.3L Subaru engines perfectly and has been designed and manufactured for 2WD Vanagons or Syncros. Our mount has the advantage of placing the stock Vanagon rubber mounts...

SCP

Tachometer Face (Black) 8K RPM

8,000 RPM tachometer face with precut shape and mounting holes. Also available in 7,000 RPM (shown).

SCP

Tachometer Face (Black) 7K RPM

7,000 RPM tachometer face with precut shape and mounting holes. Also available in 8,000 RPM.

SCP

Intake Hose Kit

Applications:2.5L normally aspirated: 2000 and later: 2004 and earlier: to connect the throttle body to the original air filter box2005 and la

SCP

DIY Wiring Harness Modification Kit

Are you an expereinced DIYer? Do you have persistence and dozens of hours of extra time to devote to modifying a Subaru wiring harness? Yes? Keep reading...   This kit is a vehicle specific guide -...