T3 Vanagon Parts 1980-1991

ScanGauge

Cable Extension for ScanGauge

If your OBD2 connector is in the rear and more than six feet away from the dash, this extension cable adds another 20 feet to your cable. In Vanagons this allows you to keep all connections inside...

Subaru

Subaru Crank Seal: Viton

Not to be confused with other brands. Viton Crank Seals will outlast the stock Subaru ones by three to four times. Viton Crank Seals are the only seals we'll use for this area that is prone to...

2WD Stainless Steel Front Brake Dust Shields

Have your factory front brake dust shields rusted away to dust? Or perhaps your mechanic removed them during your last brake job and your brakes are just flying down the road unprotected? Or maybe...

Coolant pipe stainless

This heliarc welded stainless coolant pipe is designed to go across the back and the right side of the Vanagon engine bay to allow easy connection of the Subaru coolant outlet to the Vanagon radiator...

Intake Manifold Gasket: Subaru 1999-Later

These intake gaskets should be replaced whenever the intake manifold is removed and reinstalled.Fits the following Subaru engines:2.2L: 1999-2001 Legacy 2.5L Non-Turbo: 1999-2009

Subaru

Piston Ring Set 2.5L SOHC Subaru

We have been able to source Subaru rings from the OE manufacturer. We guarantee these rings to be equal to the original replacement rings and to incorporate the latest design specifications. This set...

Nylon Hose Adapters

These nylon 12 mm or 1/2" hose fittings are very useful when connecting the Subaru engine breather hoses.For those working on later Subaru engines, you will find that there are too many engine hoses...

Hose Menders: Brass

These durable hose menders are useful for various tasks in an engine conversion.Sizes available are as follows:8 x 8mm: useful for splicing fuel hoses - especially for a Syncro Vanagon5/8" x 5/8":...

Fuel Hose Crimp Clamp

These OE stainless steel crimp clamps wrap your fuel hose one and one half times around so there is no pinched hose and little chance of fuel leakage. Why trust your Vanagon or your life to anything...

Fuel Injection Fuel Hose: 5/16"

This 5/16" fuel hose fits the Subaru and the Vanagon fuel fittings. Sold per inch so you can order order the exact length you need. For the safest fue

Westfalia Stove Knob - Gray

Replacement knobs for the Westfalia Stove are no longer available from VW. These gray replacement knobs are installed with a set screw, matching the later gray interior very well.  Sold each although...

Vanagon Coolant Reservoir Tank: 1986-1991

Good quality made tank with Blau German Reservoir Cap. This is a reproduction of the stock Vanagon 1986-1991 coolant reservoir tank. Required when using our coolant reservoir bracket with a 1980-1985...

SCP

Subaru EJ22 Power Steering Hose Kit

This hose connects the Subaru power steering pump to the power steering rack on the right side of the engine compartment. Works with four or six cylinder Subaru engines.

Accelerator Cable Kit: Manual Transmission: 8mm

This kit is a complete replacement of the stock manual transmission accelerator cable and includes all parts to connect the Subaru engine to the accelerator pedal. Fitment Notes: 1990-1994 Subaru...

Wheel Stud 52mm: Vanagon Rear (5)

These will replace the stock rear studs to gain 10mm of thread compared to the factory wheel studs, enough for most optional wheels. Their effective length is 44.5mm as compared to the stock: 34.5mm...

SCP

Tachometer Unit Calibration

The Subaru engine's ECU has a tach output. However, the late model ('86-'91) Vanagon's tachometer is not sensitive enough to pick up this signal. Lucky for you we have a solu

SCP

Vanagon Gauge Face Set (White) - 7K PRM

These white overlays are applied over your original faceplates and are available with a 7,000 or 8,000 max RPM tachometer. All attachment points are precision cut to match your original stock gauges...

SCP

Vanagon Gauge Face Set - 8K rpm white

These very nice white overlays are applied over your original faceplates and are available with 7,000 or 8,000 max rpm tachometer. Ours have the tiny square openings for the regular and trip...

Hall Effect Sensor

Replacement sensor for our Hall Effect Speed Sensor Kit. Installation Instructions

SCP

Steel Skid Plate Extension: 16"

16" metric steel addition to extend the Syncro skid plate rails for 3.3L Subaru engine conversions.

SCP

Skid Plate Extension Steel - 6"

Metric steel to extend the Syncro skid plate rails.6" is enough for one Vanagon with a 4cylinder engine.

SCP

Interface Board Deluxe

The Small Car Performance Interface Board Deluxe is designed to make a seamless 1996 and later Subaru installation with minimal engine codes, a working tach, an accurate temp gauge, and a functional...

SCP

Subaru 3.3L to Syncro Vanagon Engine Mount Adapter

The Small Car mount fits the 3.3L Subaru engines perfectly and has been designed and manufactured for 2WD Vanagons or Syncros. Our mount has the advantage of placing the stock Vanagon rubber mounts...

SCP

Subaru 3.3L to 2WD Vanagon Engine Mount Adaptor

The Small Car mount fits the 3.3L Subaru engines perfectly and has been designed and manufactured for 2WD Vanagons or Syncros. Our mount has the advantage of placing the stock Vanagon rubber mounts...