Engine Mechanical

SCP

Subaru-Vanagon 4 Cyl 2WD Engine Mount Powder Coated

New! Improved design for late Subaru engines - provides more clearance for thermostat housing and water pump. Our mount has the advantage of placing the stock Vanagon rubber mounts at the rear of the engine which drastically reduces engine movement and...

Subaru Cam Seal: Viton

Not to be confused with other brands. Viton Cam Seals will outlast the stock Subaru ones by three to four times. Viton Cam Seals are the only seals we'll use for this area that is prone to leakage.Fitment Notes:1990-2008 normally aspirated Subaru...

SCP

Subaru 4 Cyl-Vanagon 4WD Engine Mount Powder Coated

New! Improved design for late Subaru engines - provides more clearance for thermostat housing and water pump. Our mount has the advantage of placing the stock Vanagon rubber mounts at the rear of the engine which drastically reduces engine movement and...

Crank Seal Subaru Flywheel End: Viton

This crank seal is Viton and will outlast the original 3-4 times.These are the only type of seal we'll use, and they're not easily replaced. Fitment Notes:1990-2008 normally aspirated Subaru engines: 1.8, 2.0, 2.2, 2.5, 3.0, and 3.3L Sold indivually. One...

SCP

Subaru-Vanagon SVX 3.3L Parts Kit: M/T Vanagons & Syncros

A complete kit of parts to convert your Vanagon to a smooth, powerful Subaru SVX 3.3L powerplant. This kit is a matched and proven kit of parts that takes the worry out of building a Subaru powered Vanagon. No scouring the internet, fabricating parts, or...

SCP

Vanagon Basic Conversion Kit: A/T

Basic Conversion Parts Kit for Water Cooled ('83.5-'91) Automatic Transmission Vanagons Already have some of your own parts and just need a more "basic" conversion kit? With SCP's Basic Conversion Kit you're still receiving a matched and proven set...

SCP

Vanagon Basic Conversion Kit: M/T & Syncros

Basic Conversion Parts Kit for Water Cooled ('83.5-'91) Manual Transmission Vanagons & Syncros Already have some of your own parts and just need a more "basic" conversion kit? With SCP's Basic Conversion Kit you're still receiving a matched and...

Subaru

Subaru Crank Seal: Viton

Not to be confused with other brands. Viton Crank Seals will outlast the stock Subaru ones by three to four times. Viton Crank Seals are the only seals we'll use for this area that is prone to leakage.Fitment Notes:1990-2008 normally aspirated Subaru...

Intake Manifold Gasket: Subaru 1999-Later

These intake gaskets should be replaced whenever the intake manifold is removed and reinstalled.Fits the following Subaru engines:2.2L: 1999-2001 Legacy 2.5L Non-Turbo: 1999-2009 Forester 2.5L Non-Turbo:1999-2010 Impreza 2.5L Non-Turbo:1999-2011 Sold as...

Subaru

Piston Ring Set 2.5L SOHC Subaru

We have been able to source Subaru rings from the OE manufacturer. We guarantee these rings to be equal to the original replacement rings and to incorporate the latest design specifications. This set fits the following engines: Subaru Baja 2003-2006 2...

Nylon Hose Adapters

These nylon 12 mm or 1/2" hose fittings are very useful when connecting the Subaru engine breather hoses.For those working on later Subaru engines, you will find that there are too many engine hoses and not enough fittings at the filter housing. Also,...

Hose Menders: Brass

These durable hose menders are useful for various tasks in an engine conversion.Sizes available are as follows:8 x 8mm: useful for splicing fuel hoses - especially for a Syncro Vanagon5/8" x 5/8": for splicing heater hoses - in front or rear.3/8" x 1/2":...

Fuel Injection Fuel Hose: 5/16"

This 5/16" fuel hose fits the Subaru and the Vanagon fuel fittings. Sold per inch so you can order order the exact length you need. For the safest fuel line connections we recommend you use our fuel hose crimp clamps. Make sure to properly...

Steel Header Flange

Used with Small Car's Stainless Steel Header.Specifications:3/8" thick steel(3) 2" bolt holes with long end for extra support

Accelerator Cable Kit: Manual Transmission: 8mm

This kit is a complete replacement of the stock manual transmission accelerator cable and includes all parts to connect the Subaru engine to the accelerator pedal. Fitment Notes: 1990-1994 Subaru engines and the SVX have a 6mm barrel at the throttle...

SCP

Tachometer Unit Calibration

The Subaru engine's ECU has a tach output. However, the late model ('86-'91) Vanagon's tachometer is not sensitive enough to pick up this signal. Lucky for you we have a solution! We have altered the circuitry in the tachometer to increase the...

SCP

Tachometer Face (Black) 8K RPM

8,000 RPM tachometer face with precut shape and mounting holes. Also available in 7,000 RPM (shown). Installation Instructions

SCP

Tachometer Face (Black) 7K RPM

7,000 RPM tachometer face with precut shape and mounting holes. Also available in 8,000 RPM. Installation Instructions

Vanagon Waterboxer Clutch Kit

OEM Vanagon Clutch Kit. All new parts, no exchange needed. Kit Includes:Pressure PlateClutch DiscRelease BearingPiolot BearingAlignment Tool Fitment:T2 Bus: 1972-1979Waterboxer Vanagons2.2L & 2.5L Subaru Conversions with adapter plate & flywheel...

Stainless Steel Muffler Brackets

These stainless brackets are specially designed to work with Small Car's engine mounts to hold the muffler rigidly to the engine assembly and very close to the stock position. Used in one position for the Syncro and oppositely for the 2WD...