• Coolant Bottle/Reservoir Bracket

    SCP

    Coolant Bottle/Reservoir Bracket

    We designed this to bolt directly to the stock air cleaner mount on the right side firewall that formerly held the air cleaner assembly. This keeps the reservoir high enough without hitting the engine cover. The bracket is made of stainlesss steel.

    $42.95
  • Bellhousing for Subaru: Manual Transmission Vanagon

    SCP

    Bellhousing for Subaru: Manual Transmission Vanagon

    Small Car's Bellhousing is the ideal interface between the Subaru engine and the Vanagon manual transmission. Made from an aluminum alloy casting, it is precision machined and designed to use an integrated slave cylinder & release bearing. This...

    $769.00
  • Vanagon Warning Light Panel

    SCP

    Vanagon Warning Light Panel

    This panel set is for the Vanagon gauge cluster to allow the original OXS warning lamp to be used as a check engine light. It is necessary for California conversions but it is helpful for all conversions to indicate engine malfunctions and for reading...

    $10.95
  • Stage 1 Clutch Kit for SmallCar Bellhousing Stage 1 Clutch Kit for SmallCar Bellhousing Stage 1 Clutch Kit for SmallCar Bellhousing

    SCP

    Stage 1 Clutch Kit for SmallCar Bellhousing

    Need to do an entire clutch job and are tired of buying all your performance clutch parts separately? Just need everything in one product? Our Clutch Kit for Small Car's Bellhousing is for you. Fitment: Subaru engines up to 150HP (2.2L and...

    $329.95
  • Subaru-Vanagon 4 Cyl 2WD Engine Mount Powder Coated

    SCP

    Subaru-Vanagon 4 Cyl 2WD Engine Mount Powder Coated

    New! Improved design for late Subaru engines - provides more clearance for thermostat housing and water pump. Our mount has the advantage of placing the stock Vanagon rubber mounts at the rear of the engine which drastically reduces engine movement and...

    $275.00
  • ScanGauge Cable

    ScanGauge

    ScanGauge Cable

    Use this cable to allow your ScanGauge II or ScanGauge III tool to work in an extra vehicle without removing your original cable.Most applications like Vanagons and Buses will require a cable extender. Get that here. 

    $21.95
  • Subaru Cam Seal: Viton

    Subaru Cam Seal: Viton

    Not to be confused with other brands. Viton Cam Seals will outlast the stock Subaru ones by three to four times. Viton Cam Seals are the only seals we'll use for this area that is prone to leakage.Fitment Notes:1990-2008 normally aspirated Subaru...

    $9.25
  • Timing Belt Roller: Subaru 1990-Later

    Timing Belt Roller: Subaru 1990-Later

    This timing belt roller is used on all of Subaru's 2.0, 2.2 and 2.5 engines. Ours is a top quality part from Japan with double roller bearings. A much longer lasting part than the GMB or the single roller NSK that is commonly sold.Sold individually. Two...

    $42.95
  • Subaru 4 Cyl-Vanagon 4WD Engine Mount Powder Coated

    SCP

    Subaru 4 Cyl-Vanagon 4WD Engine Mount Powder Coated

    New! Improved design for late Subaru engines - provides more clearance for thermostat housing and water pump. Our mount has the advantage of placing the stock Vanagon rubber mounts at the rear of the engine which drastically reduces engine movement and...

    $275.00
  • Crank Seal Subaru Flywheel End: Viton

    Crank Seal Subaru Flywheel End: Viton

    This crank seal is Viton and will outlast the original 3-4 times.These are the only type of seal we'll use, and they're not easily replaced. Fitment Notes:1990-2008 normally aspirated Subaru engines: 1.8, 2.0, 2.2, 2.5, 3.0, and 3.3L Sold indivually. One...

    $12.75
  • Head Gasket Set: EJ25 SOHC

    Head Gasket Set: EJ25 SOHC

    This head set is from the Subaru original equipment manufacturer and has the gaskets you need when replacing rings or head gaskets.Fits the following engines:1998-2005 Impreza RS, TS Outback 2.5L, and the 06-07 2.5i2000-2004 Legacy and Outback 2...

    $205.95
  • Stainless Steel Exhaust "J" Pipe

    SCP

    Stainless Steel Exhaust "J" Pipe

    Finally! A stainless steel version of the stock Vanagon collector to catalytic converter pipe. This has loose flanges on both ends and when used with the OE metal o-ring (linked below), it allows more flexibility in muffler and catalytic...

    $105.00
  • Cable Extension for ScanGauge

    ScanGauge

    Cable Extension for ScanGauge

    If your OBD2 connector is in the rear and more than six feet away from the dash, this extension cable adds another 20 feet to your cable. In Vanagons this allows you to keep all connections inside the vehicle and out of the elements.Includes necessary...

    $39.95
  • Subaru Crank Seal: Viton

    Subaru

    Subaru Crank Seal: Viton

    Not to be confused with other brands. Viton Crank Seals will outlast the stock Subaru ones by three to four times. Viton Crank Seals are the only seals we'll use for this area that is prone to leakage.Fitment Notes:1990-2008 normally aspirated Subaru...

    $10.25
  • Coolant pipe stainless

    Coolant pipe stainless

    This heliarc welded stainless coolant pipe is designed to go across the back and the right side of the Vanagon engine bay to allow easy connection of the Subaru coolant outlet to the Vanagon radiator pipe. No coolant manifold alterations are needed when...

    $109.95
  • Intake Manifold Gasket: Subaru 1999-Later

    Intake Manifold Gasket: Subaru 1999-Later

    These intake gaskets should be replaced whenever the intake manifold is removed and reinstalled.Fits the following Subaru engines:2.2L: 1999-2001 Legacy 2.5L Non-Turbo: 1999-2009 Forester 2.5L Non-Turbo:1999-2010 Impreza 2.5L Non-Turbo:1999-2011 Sold as...

    $6.95
  • Piston Ring Set 2.5L SOHC Subaru

    Subaru

    Piston Ring Set 2.5L SOHC Subaru

    We have been able to source Subaru rings from the OE manufacturer. We guarantee these rings to be equal to the original replacement rings and to incorporate the latest design specifications. This set fits the following engines: Subaru Baja 2003-2006 2...

    $79.00
  • Hose Menders: Brass

    Hose Menders: Brass

    These durable hose menders are useful for various tasks in an engine conversion.Sizes available are as follows:8 x 8mm: useful for splicing fuel hoses - especially for a Syncro Vanagon5/8" x 5/8": for splicing heater hoses - in front or rear.3/8" x 1/2":...

    $3.25
  • Steel Header Flange

    Steel Header Flange

    Used with Small Car's Stainless Steel Header.Specifications:3/8" thick steel(3) 2" bolt holes with long end for extra support

    $17.50
  • Interface Board Deluxe Interface Board Deluxe

    SCP

    Interface Board Deluxe

    The Small Car Performance Interface Board Deluxe is designed to make a seamless 1996 and later Subaru installation with minimal engine codes, a working tach, an accurate temp gauge, and a functional neutral switch system. Installing our Interface Board...

    $200.00
  • DIY Wiring Harness Modification Kit

    SCP

    DIY Wiring Harness Modification Kit

    Are you an expereinced DIYer? Do you have persistence and dozens of hours of extra time to devote to modifying a Subaru wiring harness? Yes? Keep reading...   This kit is a vehicle specific guide - not a step-by-step manual - that will require...

    $195.00