Parts

SCP

Stage 2 Clutch Kit for Small Car Bellhousing

Need to do an entire clutch job and are tired of buying all your performance clutch parts separately? Just need everything in one product? Our Stage 2 Performance Clutch Kit for Small Car's...

SCP

Subaru-Vanagon 4 Cyl 2WD Engine Mount Powder Coated

New! Improved design for late Subaru engines - provides more clearance for thermostat housing and water pump. Our mount has the advantage of placing the stock Vanagon rubber mounts at the rear of the...

ScanGauge

ScanGauge Cable

Use this cable to allow your ScanGauge II or ScanGauge III tool to work in an extra vehicle without removing your original cable.Most applications like Vanagons and Buses will r

Subaru Cam Seal: Viton

Not to be confused with other brands. Viton Cam Seals will outlast the stock Subaru ones by three to four times. Viton Cam Seals are the only seals we'll use for this area that is prone to leakage...

Timing Belt Roller: Subaru 1990-Later

This timing belt roller is used on all of Subaru's 2.0, 2.2 and 2.5 engines. Ours is a top quality part from Japan with double roller bearings. A much longer lasting part than the GMB or the single...

Head Gasket Set: 2.2L Subaru EJ22

This head gasket set is from a Subaru original equipment manufacturer.Fits the following engines:Subaru Legacy 2.2L 1990-1998Subaru Impreza 2.2L 1995-1998

Performance Clutch Kit: SVX 5 Speed

This performance clutch kit is the best we've found for the SVX 5 speed conversion. We tried clutches from ACT, Clutchmasters, and a few others and found the pedal pressure to be excessive as well as...

SCP

Subaru 4 Cyl-Vanagon 4WD Engine Mount Powder Coated

New! Improved design for late Subaru engines - provides more clearance for thermostat housing and water pump. Our mount has the advantage of placing the stock Vanagon rubber mounts at the rear of the...

Crank Seal Subaru Flywheel End: Viton

This crank seal is Viton and will outlast the original 3-4 times.These are the only type of seal we'll use, and they're not easily replaced.

Head Gasket Set: EJ25 SOHC

This head set is from the Subaru original equipment manufacturer and has the gaskets you need when replacing rings or head gaskets.Fits the following engines:1998-2005 Impreza RS, TS Outback 2.5L,...

SCP

Stainless Steel Exhaust "J" Pipe

Finally! A stainless steel version of the stock Vanagon collector to catalytic converter pipe. This has loose flanges on both ends and when used with the OE metal o-ring (linked below), it allows...

ScanGauge

Cable Extension for ScanGauge

If your OBD2 connector is in the rear and more than six feet away from the dash, this extension cable adds another 20 feet to your cable. In Vanagons this allows you to keep all connections inside...

Subaru

Subaru Crank Seal: Viton

Not to be confused with other brands. Viton Crank Seals will outlast the stock Subaru ones by three to four times. Viton Crank Seals are the only seals we'll use for this area that is prone to...

Coolant pipe stainless

This heliarc welded stainless coolant pipe is designed to go across the back and the right side of the Vanagon engine bay to allow easy connection of the Subaru coolant outlet to the Vanagon radiator...

Intake Manifold Gasket: Subaru 1999-Later

These intake gaskets should be replaced whenever the intake manifold is removed and reinstalled.Fits the following Subaru engines:2.2L: 1999-2001 Legacy 2.5L Non-Turbo: 1999-2009

Subaru

Piston Ring Set 2.5L SOHC Subaru

We have been able to source Subaru rings from the OE manufacturer. We guarantee these rings to be equal to the original replacement rings and to incorporate the latest design specifications. This set...

Hose Menders: Brass

These durable hose menders are useful for various tasks in an engine conversion.Sizes available are as follows:8 x 8mm: useful for splicing fuel hoses - especially for a Syncro Vanagon5/8" x 5/8":...

Steel Header Flange

Used with Small Car's Stainless Steel Header.Specifications:3/8" thick steel(3) 2" bolt holes with long end for extra support

Vanagon Coolant Reservoir Tank: 1986-1991

Good quality made tank with Blau German Reservoir Cap. This is a reproduction of the stock Vanagon 1986-1991 coolant reservoir tank. Required when using our coolant reservoir bracket with a 1980-1985...

SCP

Subaru EJ22 Power Steering Hose Kit

This hose connects the Subaru power steering pump to the power steering rack on the right side of the engine compartment. Works with four or six cylinder Subaru engines.

Automatic Accelerator Cable Kit: 8mm (Drive by cable Subaru)

This kit allows the original Subaru throttle cable to be used to connect the Subaru engine to the Vanagon's Automatic transmission. The Vanagon original accelerator pedal to transmission cable will...

Accelerator Cable Kit: Manual Transmission: 8mm

This kit is a complete replacement of the stock manual transmission accelerator cable and includes all parts to connect the Subaru engine to the accelerator pedal. Fitment Notes: 1990-1994 Subaru...

SCP

Tachometer Unit Calibration

The Subaru engine's ECU has a tach output. However, the late model ('86-'91) Vanagon's tachometer is not sensitive enough to pick up this signal. Lucky for you we have a solu

SCP

Vanagon Gauge Face Set (White) - 7K PRM

These white overlays are applied over your original faceplates and are available with a 7,000 or 8,000 max RPM tachometer. All attachment points are precision cut to match your original stock gauges...