Note: If you chose to go with Halogen light bulbs you will need to install a load reduction relay as factory vans do not have properly sized wires to power 4 halogen bulbs at once. We highly reccomend going with LEDs for simplicity, longevity, and ease of install.
Octane Lighting Retro Style 7" Headlight Set
- PAIR - 7" STOCK STYLE H4 HEADLIGHTS
- GLASS LENS / METAL BACKSIDE
- HIGH INTENSITY LED BULBS
- LOW AND HIGH BEAM FUNCTION
- DOT SAE APPROVED
LED LIGHT BULB
Specifications and Features:
- 2,000 Lumens Low Beam / 2,500 Lumens High Beam Light Output Per Bulb
- 360 Degree Light Beam Angle
- 18 Watts Low Beam / 24 Watts High Beam Energy Usage Per Bulb
- LED Light Color: 6,500K
- Weatherproof Rating: IP68
- Waterproof Ball-Bearing Fan for cooling
- LED Chips per bulb
- All-In-One Design. No Ballast or Driver Required: Newest Technology
- LED Protection Circuit to protect from reverse polarity, low voltage or high voltage spikes.
- Greater Visibility - 3 times brighter than factory halogen bulbs.
- Vibration proof design.
- 30,000 Hour Lifespan
- Easy installation, Plug and Play, No modification required
- No Splicing of harnesses required for LED bulbs
- Uses 75% less power than Halogen or HID bulbs
- 3 times brighter than stock halogen bulbs
- OBC Error free operation
If you van is not already wired for inner headlights make sure you add our harness kit.
Sold as a set.
Note: The LED bulbs will not be installed in the headlight assembly when it arrives to you. You must install the bulbs. Install the bulb and seal so that it looks like the headlight in the image below. It is important that the seal is sitting flush on the back headlight surface to prevent water from entering the assembly. If the seal is not staying in place, add some super glue to hold it in place.
