Introducing the most premium Vanagon air intake kit available on the market. This intake uses a Subaru air filter contained in a stainless-steel housing that is sure to filter and to last. The air box uses existing mounting holes, so no drilling is required. Even better, our air box allows you to run the included snorkel tube up the body cavity of the van to the side vents. This means your engine is always pulling in cool, clean air and there is no droning sound for the air intake. One of the greatest features of this box is that changing the air filter is now tool free. Simply remove the two thumb screws, pull the cover off, and pull out that filter.
Kit Includes:
- Stainless Steel Air Box with mounting hardware
- Mass Air Flow Sensor Coupling
- 3 Inch Intake Duct
- 2.5 Inch Snorkel Duct
- Throttle Body Reducer Elbow
- 3 Inch Coupling
- Crank Case Ventilation Hoses and Clamps
- Miscellaneous items to finish install
Note: If you just want the airbox, select that from the drop down to exclude everything else.
Fitment:
You must choose your model year or MAF part number from the drop down. Your kit will vary based on that selection.
- 1990-2000 Subaru: You will need to bolt your MAF directly to the air box.
- 2001-2004 Subaru: Aside from some 2004 models, Subarus in this MY range did not use MAFs. Therefore, the coupling you receive will only have a single port with a nipple to be used for crank case ventilation. Your air pressure sensor (if present) can be installed into the 90-degree boot that is installed on the throttle body. Do this by drilling a hole and pressing in the sensor.
- 2004-2009 Subaru: You will receive a coupling that fits your MAF (PN:22680AA310). This coupling will also have a nipple to be used for crank case ventilation.
- 2010-2012 Subaru: You will receive a coupling that fits your MAF (PN:22680AA380). This coupling will also have a nipple to be used for crank case ventilation.
- Bostig Conversions: You will receive a coupling that fits your MAF (PN:98AB-12B579FA). This coupling will also have a nipple to be used for crank case ventilation.
We are currently 1-2 weeks out on shipping these boxes. Get your order in now to make sure you get one ASAP.
