Subaru Conversion Parts

$6.95
3 bolt metal reinforced gasket for the 2-1/4 inch flange .
In stock
+

$159.95
Performance muffler This muffler is 2 1/4" inlet and outlet size and offers substantially better flow than the stock Vanagon muffler. It is close to the...
In stock
+

$3.95
This high quality metal faced exhaust gasket fits Vanagon and Type II. The slotted mounting holes allow a proper fit for both the mufflers and tailpipes...
In stock
+

$149.95
Performance muffler This muffler is 2" inlet and and outlet size and offers substantially better flow than the stock Vanagon muffler. It is close to the...
In stock
+

$29.95
Want to build your own header? Maybe you are building a flying boat or a 3.3L powered Borgward. Flange is laser cut from 3/8" steel and can accept up to 1...
Out of stock

$599.95
New and improved thicker 321 stainless material! 7/2012 New for 2012, the 3.3L header now has 2mm thick pipes and 3mm thick collectors of 321...
Out of stock

$469.95
New and improved thicker 321 stainless material! New for 2012, this header now has 2mm thick pipes and 3mm thick collectors of 321 stainless steel....
In stock
+

$379.95
New and improved thicker 321 stainless material! New for May 2014, this header now has 2mm thick pipes and 3mm thick collectors of 321 stainless...
In stock
+

$17.95
A/C Belt for 3.3L.
In stock
+

$14.25
A/C Belt for Subaru 4 Cylinder.
In stock
+

$43.95
Accelerator Cable Kit 6mm - automatic transmission Vanagons   This kit allows the original Subaru throttle cable to be used to connect the Subaru...
In stock

$43.95
Accelerator Cable Kit 8mm- automatic transmission Vanagons   This kit allows the original Subaru throttle cable to be used to connect the Subaru...
In stock

$59.95
Accelerator Cable Kit - manual transmission 6mm Complete kit from the pedal in front to the Subaru engine in the back, similar to a stock replacement...
In stock
+

$59.95
Accelerator Cable Kit 8mm - manual transmission 8mm Complete kit from the pedal in front to the Subaru engine in the back, similar to a stock...
In stock
+

$129.95
The variable valve timing Subaru engine do not have a fuel pressure regulator attached to the fuel rail so a regulator is needed to achieve the fuel...
In stock
+

$15.50
Alternator Belt for 3.3L SVX
In stock
+

$185.00
NEW - Includes mounting hardware. Automatic Vanagons have a factory installed transmission cooler that uses engine coolant and the radiator to cool the...
In stock
+

$699.00
The ideal interface between the Subaru engine and the Vanagon manual transmission. Made from an aluminum alloy casting, it is precision machined and is...
In stock
+

$16.95
If your OBD2 connector is in the rear and more than six feet away from the dash, this extension cable adds another 20 feet to your cable. In Vanagons this...
In stock
+

$9.25
Not to be confused with other brands, these cam seals are Viton and will outlast the originals by 3-4 times. They are the only seals we'll use for this...
In stock
+

$139.95
This cat is 2" inlet and outlet and allows increased exhaust flow compared with the original Vanagon cat. It comes without oxygen sensor ports. One or two...
In stock

$139.95
This high flow cat is 2 1/4" in and out and is very compact allowing it to be installed between the header and muffler in a 3.3L Vanagon...
In stock

$195.00
This high flow catalytic converter is the latest technology with a stainless steel metallic honeycomb that offers higher temperature and vibration...
In stock

$220.00
This cat is very close in design to the original 86-91 Vanagon converter. It has a single oxygen sensor port and the flanges and offset are the same as the...
In stock

$295.95
This high flow catalytic converter is the latest technology with a stainless steel metallic honeycomb that offers higher temperature and vibration...
In stock

$325.00
This clutch kit has the pressure plate and disc that matches our Vanagon to Subaru bellhousing , alignment tool included . The pressure plate is...
In stock
+

$12.95

Clutch Pilot Bearing for Smallcar Bellhousing

In stock
+

$105.00
Collector or "J" pipe-Stainless Finally! A stainless version of the stock Vanagon collector to cat pipe. Fits between the stock 1986 and later...
In stock
+

$205.95
This hose kit is for all 4 cylinder Subagons with a reversed coolant manifold. 4 cylinder cars that do not have a reversed manifold and 3.3L powered...
In stock
+

$324.99
Front to back radiator coolant pipe set in stainless steel for 1986-91 Vanagon 2WD.
In stock
+

$324.99
Front to back radiator coolant pipe set in stainless steel for 1986-91 Vanagon Syncro.
In stock
+

$109.95
This heliarc welded stainless coolant pipe is designed to go across the back and the right side of the Vanagon engine bay to allow easy connection of the...
In stock
+

$38.95
We designed this to bolt directly to the stock air cleaner mount on the right side firewall that formerly held the air cleaner assembly. It keeps the...
In stock
+

$10.25
Not to be confused with other brands, this crank seal is Viton and will outlast the original 3-4 times. These are the only seals we'll use for this area...
In stock
+

$12.75
This crank seal is Viton and will outlast the original 3-4 times. These are the only type of seal we'll use, and they're not easily replaced. This crank...
In stock
+

$1.50
These crimp clamps are the OE style stainless with the band going one and one half times around so there is no pinched hose and little chance of fuel...
In stock

$17.50
Mount between engine crossmember and frame to lower the engine to clear the Vanagon deck lid. 2wd only. Priced per pair
In stock
+

$65.00
Use this kit with the original Vanagon cable bracket to mount the Subaru drive by wire pedal on the firewall of a 2wd manual Vanagon. Required for drive by...
In stock

$98.95
Use this kit to mount the Subaru drive by wire pedal behind the passenger side tail light. Required for drive by wire engine conversion in a manual...
In stock

$59.95
Use this kit to mount the Subaru drive by wire pedal on the engine. Required for drive by wire engine conversion in an automatic Vanagon. This kit is...
In stock

$98.95
Use this kit to mount the Subaru drive by wire pedal on the engine. Required for drive by wire engine conversion in a 2wd or 4wd manual Vanagon....
In stock

$27.50
This flange is stainless, 3/8" thick material and has a 51mm (2") center hole and is beveled on one side so it can be installed to accept a gasket or...
In stock
+

$27.50
Designed to match the 3.3L header, this 3 bolt 3/8" stainless steel flange is sized to fit over a 2 1/4" pipe and bolt to the header output. Flange...
In stock
+

$6.95

Exhaust O-ring oring o ring

In stock
+

$85.00
NOW with tubular dipstick for easier reading, and available for the 3.3L SVX engine! No more shifting your luggage and lifting the engine lid...
In stock

$0.65
This fuel hose is the perfect size to fit the Subaru and the Vanagon fuel fittings. 7mm hose is really too small and 8mm fits too loose. This fuel hose is...
In stock
+

$279.95
This gear reduction starter provides higher cranking torque and draws less current. Especially helpful with any of the Subaru engines. Fits Vanagons and...
In stock
+

$17.50
3/8" thick Steel Header Flange. 2" 3 bolt with long end for extra support. Used on our H025 Header.
In stock
+

$59.95
All the OBD2 engines from 1996 on require a vehicle speed sensor. The engines up to 1995 can also benefit from an SSK5, most conversions idle and perform...
In stock

$650.00
Harness modification New - Now includes more detailed installation instructions and special wiring directions for Westfalias After...
In stock

$750.00
Harness modification 3.0 New - Now includes more detailed installation instructions and special wiring directions for Westfalias After...
In stock

$1,070.00
This item includes the harness modification as well as an ECM for elimination of the immobilizer and for utilizing our speed sensor. After...
In stock

$1,495.00
This item includes the harness modification as well as ECM for elimination of the immobilizer and for utilizing our speed sensor. After...
In stock

$795.00
After completing over 2000 harnesses for Subaru conversions, we are pleased to offer this service. Your original Subaru harness is rebuilt to be installed...
In stock

$700.00
Harness modification New - Now includes more detailed installation instructions and special wiring directions for Westfalias After completing...
In stock

$895.00
Harness modification - 2002-2005 WRX New - Now includes more detailed installation instructions and special wiring directions for Westfalias...
In stock

$135.00
This kit enables a person with some wiring ability and lots of time to take a Subaru "bulkhead" wiring harness, remove a large number of connectors and...
In stock

$185.95
This head gasket set is from a Subaru original equipment manufacturer. Fits the following engines: Subaru Legacy 2.2L 1990-1998 Subaru Impreza 2.2L...
In stock
+

$205.95
This head set is from the Subaru original equipment manufacturer and has the gaskets you need when replacing rings or head gaskets. Fits the following...
In stock
+

$5.95
Gasket for Subaru 2.2L dual port and 2.5L header including turbo . Exhaust header to head gasket. Two required.
In stock
+

$6.95
Gasket for Subaru 2.2L single port header. Exhaust header to head gasket. Two required.
In stock
+

$11.95
Gasket for Subaru SVX 3.3L header. Exhaust header to head gasket. Two required.
Out of stock

$3.25
These durable hose menders are useful for various tasks in an engine conversion. Sizes available are as follows. 8X8mm - Useful for splicing fuel...
In stock

$14.25
Hose reducer 1 1/2"-1 1/4".
In stock
+

$65.95
Intake hose kit This hose kit is for 2000 and later normally aspirated 2.5L engines. We use these parts to connect the throttle body to the original...
In stock
+

$6.95
These intake gaskets should be replaced whenever the intake manifold is removed and reinstalled. Fits the following Subaru engines: 1999-2001...
In stock
+

$6.50
These intake gaskets should be replaced whenever the intake manifold is removed and reinstalled. Fits the following Subaru engines: 1990-1998 2.2L...
In stock
+

$6.50
These intake gaskets should be replaced whenever the intake manifold is removed and reinstalled. Fits the following Subaru engines: 2.5L DOHC...
In stock
+

$75.00
Alert! A $10 discount is available when purchasing with a conversion kit or harness modification kit.   This interface board is for 1996 and...
In stock
+

$4.25
Here is a fine way to distinguish your Vanagon as a repowered VW, or for the Subaru owner who wants to add a bit of bling. The 2.5 DOHC lettering is...
In stock

$65.95
2 1/4" 409 stainless steel 3.00" radius 180 degree mandrel bend, short.
In stock
+

$27.50
2" aluminized 3.00" radius 180 degree mandrel bend, short.
In stock
+

$159.00
We searched very long and hard for a muffler that was compact enough to fit in the space in the Vanagon left wheel well, free flowing enough to not lose...
In stock
+

$40.00
Single-Wall, 15-degree Angle-Cut, Rolled-Edge. Diameter: 3" I.D. Inlet: 2.25" Length: 7"
In stock
+

$2.25
These 12 mm or 1/2" hose fittings are very useful when connecting up all the breather hoses for the Subaru engines. On later engines especially, there are...
In stock

$6.37
Use to delete oil cooler above the oil filter. For models with oil cooler the cooler must be removed for the conversion.
In stock
+

$329.00
New! This performance chip picks up where the legendary ECUtune, Inc Stage 1 chips left off.     The 92 through 95 model year US market SVX...
Out of stock

$79.00
We have been able to source Subaru rings from the OE manufacturer. We guarantee these rings to be equal to the original replacement rings and to...
Out of stock

$79.00
We have been able to source Subaru rings from the OE manufacturer. We guarantee these rings to be equal to the original replacement rings and to...
In stock
+

$14.95
Here is a handy accessory outlet that you can install in any number of places to power up your cellphone, laptop, DVD viewer or other 12 volt equipment. It...
In stock
+

$85.00
Vanagon - Subaru Power Steering Pressure Hose - 4 or 6 Cylinder This hose attaches directly to the Subaru power steering pump and connects to the...
In stock

$129.00
Quiet Vanagon - Subaru Power Steering Pressure Hose - 4 or 6 Cylinder This hose attaches directly to the Subaru power steering pump and connects to...
In stock

$55.00
Coolant reservoir tank Vanagon 86-91. Required when using our coolant reservoir bracket with -85 Vanagon conversion.
In stock
+

$269.00
Alert: $30 discount available when purchasing a conversion kit. New! Cast aluminum reversed coolant manifold for Subaru 4 cylinder engine it is our...
Out of stock

$20.95
We tested several brands of rubber mounts and discovered that there is a difference between the cheapest and the best. Ours are noticeably quieter than...
In stock
+

$24.95
We tested several brands of rubber mounts and discovered that there is a difference between the cheapest and the best. Ours are noticeably quieter than...
In stock
+

$1,895.00 $1,295.00
The SC ECU and Injector driver for the Subaru EE20 turbo diesel is a standalone engine management system for this fantastic engine. Small Car Performance...
In stock

$159.00
This CAN bus to USB interface enables you to connect your PC to the SC ECUs. It comes complete with 2m of wiring to connect to the engine wiring loom and a...
In stock
+

$21.95
Use this cable to allow your ScanGauge tool to work in an extra vehicle without removing your original cable.
In stock
+

$169.95
The Ultra Compact Automotive Computer The ScanGaugeII is an extremely compact automotive computer designed to read and display information about your...
In stock

$49.95
Metric steel to extend the Syncro skid plate rails - 16" is needed for 3.3L engines.
In stock
+

$19.25
Metric steel to extend the Syncro skid plate rails - 6" is enough for one Vanagon w/4cyl.
In stock
+

$176.67
Replacement slave cylinder and release bearing for our bellhousing. Metal version, recommended for all version bellhousing. We recommends replacing...
In stock
+

$395.00
This Stage 2 performance clutch kit has the pressure plate and disc that matches our Vanagon to Subaru bellhousing , alignment tool included . Use...
In stock
+

$27.25
NEW ITEM ! A complete stainless nut and capscrew set for your Vanagon exhaust. This kit has hardware for the following: Collector or "J" pipe to stock...
In stock
+

$74.95
These stainless brackets are specially designed to work with the Smallcar mount to hold the muffler rigidly to the engine assembly. Used in one position...
In stock
+