Conversion Parts: 2.2L/2.5L

Why should you buy our parts?
 
  • We install, service, and personally use what we sell. After building over 300 Subaru powered Vanagons, we have learned a lot about how to make them run well. From cooling systems to wiring harnesses, we have designed our products to get your Vanagon conversion up and running quickly and keep it performing well for years.
  • Our parts allow you to install a Subaru engine and lose nothing of the original Vanagon's utility and great design. This includes having great ground clearance without the exhaust and other components hanging down below the engine, the ability to refit the Syncro skid plate, and built-in support for the muffler. 
  • Our cooling system has been refined to perform better than anything else available. Simple, easy to bleed, and a heater system that works at least as well as the original. 
  • It can be difficult to find all the right parts to make your Subaru powered Vanagon come to life. When you purchase our parts, we help your project come together quickly and successfully. For those who choose to buy a complete package from us, expect prompt, accurate replies to your questions. No one else offers anything close in design, performance and support.
$680.00 $650.00
Introducing "The Subie-Stan" header from Small Car Performance.  The design has been perfected by the world famous Stan's Headers and now the option for...
In stock
+

$6.95
Three bolt reinforced metal gasket for the 2-1/4" Exhaust Flange .
In stock
+

$169.95
This muffler is 2 1/4" inlet and outlet size and offers substantially better flow than the stock Vanagon muffler. It is close to the stock size in both...
In stock
+

$27.50
Specifications: 2" aluminized 3" radius 180 degree mandrel bend
In stock
+

$3.95
This high quality metal faced exhaust gasket fits Vanagons and Type IIs. The slotted mounting holes allow a proper fit for both the mufflers and tailpipes...
In stock
+

$159.95
This muffler has a 2" inlet and and outlet and offers substantially better flow than the stock Vanagon muffler. It is close to the stock size in both...
Out of stock

$139.95
The 2" Performance Catalytic Converter has a 2" inlet and outlet and allows increased exhaust flow compared with the stock Vanagon cat. Available with...

$27.50
Made from 3/8” thick stainless steel, this flange has a 51mm (2") center hole and is beveled on one side so it can be installed to accept a  2" Exhaust...
In stock
+

$479.95
After many years in development, we’ve perfected the design and construction of our stainless-steel header. We’ve designed it to be as compact as possible...
In stock
+

$569.95
After many years in development, we’ve perfected the design and construction of our stainless-steel header. We’ve designed it to be as compact as possible...
In stock

$17.50
Mounts between the engine crossmember and frame to lower the engine to clear the Vanagon deck lid. This is for 2WD Vanagons ONLY. Priced per...
In stock
+

$43.95
This kit allows the original Subaru throttle cable to be used to connect the Subaru engine to the Vanagon's Automatic transmission. The Vanagon original...
In stock
+

$43.95
This kit allows the original Subaru throttle cable to be used to connect the Subaru engine to the Vanagon’s Automatic transmission. The Vanagon original...
In stock
+

$59.95
This kit is a complete replacement of the stock manual transmission accelerator cable and includes all parts to connect the Subaru engine to the...
In stock
+

$59.95
This kit is a complete replacement of the stock manual transmission accelerator cable and includes all parts to connect the Subaru engine to the...
In stock
+

$129.95
Subaru's variable valve timing engine does not have a fuel pressure regulator attached to the fuel rail. Consequently, a regulator is needed to achieve the...
In stock
+

$14.25
A/C Belt for 4 Cylinder Subaru.
In stock
+

$14.95
Engine not breathing as well as it should? Install a new air filter and safeguard your engine from the dirty and dusty roads of your journey. OEM...
In stock
+

$185.00
We recommend upgrading the factory VW Automatic Transmission Cooler – especially when upgrading to a higher horsepower Subaru engine. It is a part that...
In stock
+

$769.00
Small Car's Bellhousing is the ideal interface between the Subaru engine and the Vanagon manual transmission. Made from an aluminum alloy casting, it is...
In stock
+

$5.95
This is clutch throwout bearing bleeder valve.
In stock
+

$532.95
Tired of buying all your clutch parts separately? Just need everything in one product? Our Clutch Kit for Small Car's Bellhousing is for you. The Kit...
In stock
+

$8.95
Spacer used for the clutch master cylinder
In stock
+

$12.95

Clutch Pilot Bearing for Smallcar Bellhousing

In stock
+

$7.69
This is the replacement clutch pilot bearing seal for the Small Car Bellhousing
In stock
+

$325.00
This clutch pressure plate and disc match our Vanagon to Subaru Bellhousing  and can be used for Subaru engines up to 150hp. The pressure plate is the...
In stock
+

$1,995.95
Live in Colorado? Want a SCP Subaru conversion? We've got you covered.   Air Care Colorado (ACC) requires two catalytic converters for emissions...
In stock
+

$205.95
This hose kit is for all 4 cylinder Subaru Vanagons with a reversed coolant manifold. 4 cylinder cars that do not have a reversed manifold and 3.3L powered...
In stock
+

$14.95
This coolant level sensor fits the pressurized coolant expansion tank in 1983-1990 Vanagons. MFG Part Number: 251919372
In stock
+

$109.95
This heliarc welded stainless coolant pipe is designed to go across the back and the right side of the Vanagon engine bay to allow easy connection of the...
In stock
+

$38.95
We designed this to bolt directly to the stock air cleaner mount on the right side firewall that formerly held the air cleaner assembly. This keeps the...
In stock
+

$12.75
This crank seal is Viton and will outlast the original 3-4 times. These are the only type of seal we'll use, and they're not easily replaced....
In stock
+

$195.00
This kit enables a person with some wiring ability and lots of time to take a Subaru "bulkhead" wiring harness, remove many connectors and wires, splice...
In stock

$65.00
Use this kit with the original Vanagon cable bracket to mount the Subaru drive by wire pedal on the firewall of a 2WD manual transmission Vanagon....
In stock

$59.95
Use this kit with the original Vanagon cable bracket to mount the Subaru drive by wire pedal directly to the engine. Application & Fitment...
In stock

$98.95
Use this kit to mount the Subaru drive by wire pedal onto the engine. Application & Fitment Notes: 2WD & Syncro Manual Transmission...
In stock

$795.00
This Harness and ECU modification is for the following Subaru engines: Impreza 2.5L normally aspirated 2005-2007 Forester 2.5L normally...
In stock

$1,070.00
This Harness and ECU modification is for the following Subaru engines: Impreza 2.5L normally aspirated 2008-2010 Forester 2.5L normally...
In stock

$1,495.00
This Harness and ECU modification is for the following Subaru engines: Legacy 2.5L normally aspirated 2010-12     Harness...
In stock

$98.95
Use this kit to mount the Subaru drive by wire pedal behind the passenger side tail light.   Application & Fitment Notes: 2WD &...
In stock

$27.50
Designed to match the 3.3L header, this three bolt 3/8" stainless steel flange is sized to fit over a 2 1/4" pipe and bolt to the header output. You...
In stock
+

$85.00
NOW with tubular dipstick for easier reading. Also available for the 3.3L SVX engine! No more shifting your luggage and lifting the engine...
In stock

$1.50
These OE stainless steel crimp clamps wrap your fuel hose one and one half times around so there is no pinched hose and little chance of fuel leakage. Why...
In stock

$0.65
This fuel hose is the perfect size to fit the Subaru and the Vanagon fuel fittings. 7mm hose is too small and 8mm fits too loose. This fuel hose is just...
In stock
+

$44.95
Want to keep your Subaru conversion running for many miles into the future? One of the easiest ways to extend the life of your engine conversion is to...
In stock
+

$39.95
Idemitsu 5W-30 SP/GF-6 fully synthetic oil is the engine oil we recommend for all Subaru conversions once they pass the initial 500 miles break-in period....
In stock
+

$279.95
This gear reduction starter provides higher cranking torque and draws less current. This is especially helpful with any of the Subaru engines. Fits...
In stock
+

$16.00
Replacement sensor for our Hall Effect Speed Sensor Kit. Installation Instructions
In stock
+

$750.00
This Harness and ECU modification is for the following Subaru engines: 2001-2004 Legacy & Outback 3.0L engines   Harness...
In stock

$1,050.00
This Harness and ECU modification is for the following Subaru engines: Impreza WRX 2.0L Turbo: 2002-2005 Impreza WRX STI 2.5L Turbo: 2004...
In stock

$185.95
This head gasket set is from a Subaru original equipment manufacturer. Fits the following engines: Subaru Legacy 2.2L 1990-1998 Subaru...
In stock
+

$205.95
This head set is from the Subaru original equipment manufacturer and has the gaskets you need when replacing rings or head gaskets. Fits the...
In stock
+

$6.95
Gasket for Subaru 2.2L single port header. Exhaust header to head gasket. Sold individually. Two are required.
In stock
+

$5.95
Gasket for Subaru 2.2L Dual Port and 2.5L header - including turbo. Exhaust header to head gasket. Sold individually. Two are required.
In stock
+

$3.25
These durable hose menders are useful for various tasks in an engine conversion. Sizes available are as follows: 8 x 8mm: useful for...
In stock

$14.25
Hose reducer 1 ½"-1 ¼"
In stock
+

$7.25
Input shaft seal for the Small Car Performance Bellhousing. Manufacturer Part Number: 043.605
In stock
+

$65.95
Applications: 2.5L normally aspirated: 2000 and later:  2004 and earlier: to connect the throttle body to the original air filter box...
In stock
+

$6.95
These intake gaskets should be replaced whenever the intake manifold is removed and reinstalled. Fits the following Subaru engines: 2.2L:...
In stock
+

$7.25
These intake gaskets should be replaced whenever the intake manifold is removed and reinstalled. Fits the following Subaru engines:...
In stock
+

$6.50
These intake gaskets should be replaced whenever the intake manifold is removed and reinstalled. Fits the following Subaru engines: 2.5L...
In stock
+

$75.00
This interface board is for 1996 and later Subaru OBDII engines to eliminate seven common fault codes: fuel tank sensor signal, fuel tank pressure valve,...
In stock
+

$4.25
Here is a fine way to distinguish your Vanagon as a repowered VW or for the Subaru owner who wants to add a bit of bling. The 2.5 DOHC lettering is perfect...
In stock

$42.39
SCP highly recommends making the switch to Whiteline’s Lower Control Arm Bushings. With Whiteline’s  lifetime warranty  you’ll never have to think about...
In stock
+

$65.95
2 1/4" 409 stainless steel 3.00" radius 180 degree mandrel bend, short.
In stock
+

$750.00
This Harness and ECU modification is for the following Subaru engines: 2.2L & 2.5L Normally Aspirated: Early to 2004   Harness...
In stock

$2.25
These nylon 12 mm or 1/2" hose fittings are very useful when connecting the Subaru engine breather hoses. For those working on later Subaru engines,...
In stock

$9.95
Union Sangyo's oil filter is SCP's filter of choice for all our EJ25 Subaru conversions.   Union Sangyo is synonymous with Kaizen, the Japanese...
In stock
+

$16.95
Pentosin Pentofrost NF is an environmentally friendly antifreeze concentrate for multipurpose applications in watercooled engines. It does not contain any...
In stock
+

$9.95
Pentosin Super DOT 4 is a high quality brake fluid and is SCP's preferred brand for all our brake upgrades.   Features: High safety...
In stock
+

$79.00
We have been able to source Subaru rings from the OE manufacturer. We guarantee these rings to be equal to the original replacement rings and to...
In stock
+

$14.95
Tired of fiddling with your original Vanagon dash cigarette lighter? Frustrated that it wouldn't hold your cell phone or any 12V plug while you're cruising...
In stock
+

$9.95
ACDelco DEXRON® III is a premium quality automatic transmission fluid that is also an excellent lubricant and hydraulic fluid in power steering...
In stock
+

$13.00
14mm brass fitting for power steering hose
In stock
+

$85.00
This hose connects the Subaru power steering pump to the power steering rack on the right side of the engine compartment.  Works with four or six cylinder...
In stock

$129.00
Built with internal baffling to help reduce pump noise, this hose connects the Subaru power steering pump to the power steering rack on the right side of...
In stock

$36.95
High amperage 12v relay kit for EE20 SC ECU or glow plugs. Includes relay and socket with wire terminals. One kit required for ECU and one for the glow...
In stock
+

$50.95
Fitting for Release Bearing in Small Car's Bellhousing.   Includes Bleeder Screw.
In stock
+

$369.95 $299.95
The SCP c ast aluminum reversed coolant manifold for four cylinder Subaru engines has been developed and perfected over the last thirteen years and...
In stock
+

$29.95
We tested several brands of rubber mounts and discovered that there is a difference between the cheapest and the best. Ours are noticeably quieter than...
In stock
+

$24.95
Inventory Update: Inner Engine Mounts are increasingly more difficult to source and are currently out of stock. Fortunately, we have had proven...
In stock
+

$1,895.00 $1,295.00
The SC ECU and Injector driver for the Subaru EE20 turbo diesel is a standalone engine management system for this fantastic engine. Small Car Performance...
In stock

$159.00
This CAN bus to USB interface enables you to connect your PC to the SC ECUs. It comes complete with 2m of wiring to connect to the engine wiring loom and a...
In stock
+

$19.25
Metric steel to extend the Syncro skid plate rails. 6" is enough for one Vanagon with a 4cylinder engine.
In stock
+

$320.00
Replacement slave cylinder and release bearing for Small Car's Bellhousing. This is a metal version and recommended for ALL bellhousings. We recommend...
In stock
+

$599.95
Tired of buying all your performance clutch parts separately? Just need everything in one product? Our Stage 2 Performance Clutch Kit for Small Car's...
In stock
+

$395.00
This Stage 2 performance clutch pressure plate and disc match our Vanagon to Subaru Bellhousing  and can be used for Subaru engines up to 250hp. The...
In stock
+

$27.25
A complete stainless nut and capscrew set for your Vanagon exhaust. Kit includes hardware for the following: Collector or "J" pipe to stock...
In stock
+

$24.95
This clamp is made with heavy duty 14 gauge stainless steel and is much tougher than other brands. Fits: 1980-1985 stock Vanagon mufflers...
In stock
+

$24.95
This clamp is made with heavy duty 14 gauge stainless steel and is much tougher than other brands. Fits: 1986-1991 stock Vanagon muffler...
In stock
+

$24.95
This clamp is made with heavy duty 14 gauge stainless steel and is much tougher than other brands. Fits: Small Car's 2" Performance Muffler...
In stock
+

$105.00
Finally! A stainless steel version of the stock Vanagon collector to catalytic converter pipe. This has loose flanges on both ends and when used with the...
In stock

$324.99
Front to back stainless steel coolant pipe set.   Fittment: 2WD Late Model (1986-1991) Vanagons SCP Subaru Vanagon Conversions
In stock
+

$324.99
Front to back radiator coolant pipe set in stainless steel for 1986-91 Vanagon Syncro.
In stock
+

$150.00
This is the standard stainless steel coolant pipe for our class-leading coolant system.  This part will make any conversion simpler, more reliable, and...
In stock
+

$549.00
After many years in development, we’ve perfected the design and construction of our stainless-steel header. We’ve designed it to be as compact as possible...
In stock
+